PRODUCT INFORMATION / CASE – Coatings Adhesives, Sealants and Elastomers
CASE – Coatings Adhesives, Sealants and Elastomers
Overview
Product
Sample Request
Coatings:
Coating is the application of one coating material onto another, known as carrier substrate. The carrier substrate can be paper, film or aluminium foil that results in the enhancement of a material's properties, depending on application and end use. Typical applicants for coatings include: automotive refinishing, electroplating, and paint and powder coatings. The coating enhances aesthetic and physical properties, and safeguards substrate wear and tear.
Adhesives:
Materials in which a coating of glue is applied to make a substrate adhesive. An adhesive material is any substance applied to the surface of another material that binds them together and resists separation. This process includes the ability of adhesives to bind different materials together, disperse stress more efficiently across joints, is more effective, improves the aesthetics of design, and enhances design flexibility. Disadvantages of using adhesives include: decreased stability at high temperatures, relative weakness in bonding large objects with small bonding surface areas, and greater difficulty in separating objects.
Sealants:
Sealants bind two materials. It is a type of mechanical element used to block the passage of liquids, gases, dust, and heat transmission through the surface/corners/openings of any material. Sealants may vary in size, strength or nature. They may be weak or strong, flexible or rigid, permanent or temporary. Sealants are not adhesives, but some have adhesive qualities and are called adhesive-sealants or structural sealants.
Elastomers:
An elastomer is a polymer with viscoelasticity, (having both viscosity and elasticity), and has very weak inter-molecular forces. The most common form of elastomer is rubber. Elastomers are amorphous polymers existing above glass transition temperatures, resetting their considerable segmental motion into effect during operation. Rubber is relatively soft, with deformable elasticity, (E- -MPa), deformable and are flexible in nature.
Titanium Dioxide (Rutile and Anatase)
MEKO /Antiskin
Dispersing Agent N-40, A-40 for water based emulsion paints
Opacifying Latex- Polyrheo OP 66
Defoamer: FoamX 200, 643
Latexes :Rheodisp – 290D, 400 D, 261….
Plasticizers – Various – DBP, DOTP, DINP, DPGDB, DEGDB, etc
2 EHA – 2- Ethyl Hexanoic Acid
Zirconium Carbonate – for drier manufacture
Rheomine 95 – PH Stabilizer
SLES – Sodium Lauryl Ether Sulphate 70 % , 56%, 30 % – 1 Mole, 2 Moles, 3 Moles
Dispering Agents for solvent based paints.
Rheofilm 255 – Coalescing agent
Methylene Chloride – Paint removers
Rheodil – Reactive Diluents for Epoxy systems
2- Ethyl hexanoic Acid (2 EHA) – for drier manufacture
RESINS - ALKYDS, UPR
TOFA – Tall Oil Fatty Acids (TOLFAT 1, TOLFAT 2, TOLFAT 30, TOLFAT C2B)
Urea Formaldehyde Resins (UI 20HS)
Melamine Formaldehyde Resins
Epoxy Resins
Colfat 18 – Veg Oil Fatty Acid
Solfat 2 – Soya Fatty Acid
Colfat 810 – Caprylic Capric Fatty Acid
Colfat 2A – Coconut Oil Fatty Acid
Linseed Oil Fatty Acid
Pentaerithritol 98%, 96%, 92%
Phthalic Anhydride
Maleic Anhydride
Benzoic Acid
Dimer Fatty Acid
Dicylcopentadine(DCPD)- 95%, 85%, 75%
Castor Oil and Derivatives
12 HSA (Hydroxy Stearic Acid)
Alkyd Resin & Raw materials for Alkyd Resins
RHEOMINE 303 (Hexa Methoxy Methyl Melamine)
POWDER COATINGS
Polyester Resins
Epoxy Resins
Polyamide Hardeners
Phenalkamine Hardeners
TGIC and HAA Hardeners
SOLVENTS
Ethyl Acetate
Butyl Acetate
Dicylcopentadine(DCPD)- 95%, 85%, 75%
Propylene Glycol – PG – USP
Green Solvent / VOC Free
Polysolv Bio Solvent – N-Butyl Tallate
MEK – Methyl ethyl ketone
Aromatic – 100 , 150, 200
Rheofilm 255 – Texanol equivalent
DMC – Di Methyl Carbonate
Aromatic – 100 , 150, 200
EMULSION POLYMERISATION
Butyl Acrylate Monomer
Styrene Monomer
Pot Per Sulphate, Sodium Per Sulphate
Sodium Vinyl Sulfonate (SVS)
DAAM ( Di Acetone Acrylamide)
ATBS ( 2-Acrylamide 2-Methylpropanesulfonic Acid)
INDUSTRIAL ADDITIVES
Pine Oil
To request more information, MSDS, quote/sample about this product please click below link.
Request a Sample
